All New Point System Co.,Ltd.

| | | | | | |

ANPS-1

DEDICATED MICRO OHM TESTER
Achieve 0.001Ω mΩ Circuit Resistance Continuity Test !

Hardware Environment

Product Signatur

ANPS-1 Dedicated Micro OHM Tester Specification

Equipment Specification
Pin Base Sizing:	680 X 580mm
Testing Points:	4,096～16,384 Points
Tester Specification
2W Continuity Resistance:	10Ω ～ 50KΩ
4W Continuity Resistance:	0.01Ω ～ 100Ω(1mΩ Option)
Insulation Resistance:	100KΩ ～ 100MΩ
Testing Voltage:	15V ～ 250V (300V Option)
Testing Current:	20mA(2W) 、10mA(4W)
Working Environment
Power Supply:	AC110/220V ± 10%; 60/ 50Hz(1ø)
Air Pump:	6 ～ 8 kgs / C㎡
Working Temperature:	20 ℃ ～ 25 ℃
Working Humidity:	40 % ～ 60 % (Without vapor condensed)
Measurements of Tester Unit:	1593(L) x 2108(W) x 2000mm(H)
Hardware and Software System Requirement
Operation System:	Windows
Printer:	Barcode Printer
Display:	LCD Monitor

Signature ANPS-1 Dedicated Micro OHM Tester

	The world highest level of PCB 4-Wires O/S mΩ tester.
—	Special for vehicle application PCB, HDI with Multi-layer PCB and thin-circuit line PCB.
—	Continuity test spec. can reach up to 0.001Ω.
—	Option choice of 250v for isolation test.
—	4-Wires design which can effectivly solve the influenece under contact resistance.

	Strengthen test accuracy and avoid any test missing.
—	Net list data comparison.
—	Equipped with function of editing multiple pieces
—	Dynamic test point on / off detector, PCB placing error detecting.

	Shorten testing time, increase efficiency and lower test-error.
—	Software and hardware is specially designed to shorten testing time.
—	At the same time, the actually resistance will also be shown out.
—	Designed in graphical oriented; let you find any point faster and easier.
—	Check any problematic problem directly on the monitor.
—	Equipped with function of editing multiple pieces.

	Let E-testing department go online.
—	Work in Windows operating system.

	Easier to organize reports.
—	Every report can be edited and viewed using MS-Word, Excel, and PowerPoint.

	Tester is integrated with repair station.
—	Print out the report in bar-code mode.
—	Increase your testing department's efficiency, and shorten testing time.

	User-friendly environment
—	Can edit function buttons, support multiple users environment setting.
—	Multiple users management with password protection.
—	Online tutorial.

	High technology working environment.
—	Prepared for the future; internet, intranet, B2B and ERP.

If you have interest in our products, or need more information about products, please contact us